zhou yang和Claude Opus 5.5
ece65f7c19
- 0.1.19 配网热点：没配 WiFi / 连续 60 s 连不上时自己开 SoftAP，192.168.4.1 网页里加删 WiFi、改 MQTT； 配置拼成 wifi / mqtt 命令走唯一的命令处理器（新链路号 3 CMD_LINK_AP），MQTT 仍不收配置命令 - 0.1.20 热点口令固定 88888888 - 0.1.21 风扇：板温 >=40 ℃ 上电、<38 ℃ 断电，40~65 ℃ 线性调速；fan 命令加可选 sec（下限到点自动交回） - mqtt 命令加 keep_pass；net 回应加 ap；status 的 fan 加 left - 新增 test_prov（13 例），test_t_thermal +3；29 ctest 全绿 Co-Authored-By: Claude Opus 5.5 <[email protected]>
104 行
3.8 KiB
CMake
104 行
3.8 KiB
CMake
# PhoneRail 宿主机构建 —— 不依赖 ESP-IDF，用来跑单元测试（CTest）。
|
||
#
|
||
# bash host/test.sh 配置 + 编译 + ctest
|
||
#
|
||
# 与 IDF 目标共享的源码只有 ../main 里的与硬件无关部分。
|
||
# 新增一个既要上板又要被测的 .c，必须同时加进：
|
||
# ../main/CMakeLists.txt 的 SRCS 和 下面的 PHONERAIL_CORE_SRCS
|
||
# HAL 里新增一路实现则要同时加进：
|
||
# ../components/phonerail_hal/CMakeLists.txt 的 SRCS（esp 那份）
|
||
# 和下面的 PHONERAIL_HAL_SIM_SRCS（sim 那份）
|
||
# 新增一个器件驱动则是：
|
||
# ../components/drv/CMakeLists.txt 的 SRCS 和 下面的 PHONERAIL_DRV_SRCS
|
||
cmake_minimum_required(VERSION 3.16)
|
||
project(phonerail_host C)
|
||
|
||
set(CMAKE_C_STANDARD 11)
|
||
set(CMAKE_C_STANDARD_REQUIRED ON)
|
||
add_compile_options(-Wall -Wextra -Werror)
|
||
|
||
set(FW_ROOT ${CMAKE_CURRENT_SOURCE_DIR}/..)
|
||
|
||
# ---- 被测代码 -------------------------------------------------------------
|
||
set(PHONERAIL_CORE_SRCS
|
||
${FW_ROOT}/main/version.c
|
||
${FW_ROOT}/main/rail.c
|
||
${FW_ROOT}/main/rail_cfg.c
|
||
${FW_ROOT}/main/i2cbus.c
|
||
${FW_ROOT}/main/slot.c
|
||
${FW_ROOT}/main/sched.c
|
||
${FW_ROOT}/main/tasks.c
|
||
${FW_ROOT}/main/chgmode.c
|
||
${FW_ROOT}/main/hubctl.c
|
||
${FW_ROOT}/main/pdmon.c
|
||
${FW_ROOT}/main/t_safety.c
|
||
${FW_ROOT}/main/t_actuator.c
|
||
${FW_ROOT}/main/t_thermal.c
|
||
${FW_ROOT}/main/evlog.c
|
||
${FW_ROOT}/main/cmd_json.c
|
||
${FW_ROOT}/main/cmd.c
|
||
${FW_ROOT}/main/cmd_exec.c
|
||
${FW_ROOT}/main/cmd_report.c
|
||
${FW_ROOT}/main/ulink.c
|
||
${FW_ROOT}/main/cmd_net.c
|
||
${FW_ROOT}/main/netcfg.c
|
||
${FW_ROOT}/main/mlink.c
|
||
${FW_ROOT}/main/prov.c
|
||
${FW_ROOT}/main/bringup.c
|
||
${FW_ROOT}/main/ntc.c
|
||
${FW_ROOT}/main/ota.c
|
||
)
|
||
|
||
# HAL：接口在 include/，宿主机链 sim/ 的实现（esp/ 那份只有 IDF 目标编）。
|
||
set(PHONERAIL_HAL_DIR ${FW_ROOT}/components/phonerail_hal)
|
||
set(PHONERAIL_HAL_SIM_SRCS
|
||
${PHONERAIL_HAL_DIR}/hal_err.c
|
||
${PHONERAIL_HAL_DIR}/hal_i2c_acct.c
|
||
${PHONERAIL_HAL_DIR}/sim/hal_lock_sim.c
|
||
${PHONERAIL_HAL_DIR}/sim/sim_hal.c
|
||
${PHONERAIL_HAL_DIR}/sim/hal_i2c_sim.c
|
||
${PHONERAIL_HAL_DIR}/sim/hal_gpio_sim.c
|
||
${PHONERAIL_HAL_DIR}/sim/sim_sr595.c
|
||
${PHONERAIL_HAL_DIR}/sim/sim_pca9555.c
|
||
${PHONERAIL_HAL_DIR}/sim/hal_pwm_sim.c
|
||
${PHONERAIL_HAL_DIR}/sim/hal_time_sim.c
|
||
${PHONERAIL_HAL_DIR}/sim/hal_store_sim.c
|
||
)
|
||
|
||
# 器件驱动：与平台无关（只经 hal_i2c_*），两个目标编的是同一份源码。
|
||
set(PHONERAIL_DRV_DIR ${FW_ROOT}/components/drv)
|
||
set(PHONERAIL_DRV_SRCS
|
||
${PHONERAIL_DRV_DIR}/ina226.c
|
||
${PHONERAIL_DRV_DIR}/dac63204.c
|
||
${PHONERAIL_DRV_DIR}/sr595.c
|
||
${PHONERAIL_DRV_DIR}/pca9555.c
|
||
${PHONERAIL_DRV_DIR}/tca9548a.c
|
||
${PHONERAIL_DRV_DIR}/ch224a.c
|
||
)
|
||
|
||
add_library(phonerail_core STATIC
|
||
${PHONERAIL_CORE_SRCS} ${PHONERAIL_HAL_SIM_SRCS} ${PHONERAIL_DRV_SRCS})
|
||
target_include_directories(phonerail_core PUBLIC
|
||
${FW_ROOT}/main
|
||
${PHONERAIL_HAL_DIR}/include
|
||
${PHONERAIL_HAL_DIR}/sim
|
||
${PHONERAIL_DRV_DIR}/include)
|
||
|
||
# ---- 测试框架 Unity（从 ESP-IDF v5.4 原样复制到 third_party/，与上板测试同一套）
|
||
add_library(unity STATIC ${FW_ROOT}/third_party/unity/unity.c)
|
||
target_include_directories(unity PUBLIC ${FW_ROOT}/third_party/unity)
|
||
target_compile_definitions(unity PUBLIC UNITY_OUTPUT_COLOR)
|
||
# 第三方源码不吃本工程的 -Werror
|
||
target_compile_options(unity PRIVATE -w)
|
||
|
||
# ---- 测试用例：test/test_*.c 一个文件一个可执行 + 一条 ctest ---------------
|
||
enable_testing()
|
||
|
||
file(GLOB PHONERAIL_TESTS ${FW_ROOT}/test/test_*.c)
|
||
foreach(test_src ${PHONERAIL_TESTS})
|
||
get_filename_component(test_name ${test_src} NAME_WE)
|
||
add_executable(${test_name} ${test_src})
|
||
target_link_libraries(${test_name} PRIVATE phonerail_core unity)
|
||
add_test(NAME ${test_name} COMMAND ${test_name})
|
||
endforeach()
|