R2 底板改 4 层（D15）：规则 / 几何 / 背面摆位 / 4 层布线与铺铜，已下发
- 规则：铜层 2→4，差分 0.28/0.18，间距 0.15，过孔 0.3/0.2（rules_base） - 几何：98×98 板框 + 4×M3，槽阵居中，L1 12V 大铜 + 指头（pcb_base） - 摆位：五插槽留 L1，其余 133 件翻到 L4；背面镜像规则实测；Hub 放走廊 2、 东移 2.5 mm；扇出圈 / 小件间距 1.5（去耦例外）/ 9 A 过孔阵禁区（place_base） - 叠层按用户决定改为 L1 槽面 / L2 整层 +3V3 / L3 整层 GND / L4 器件面 - 布线：D± 七对按构造布通（USB3 掉头、USB1/2 北去掉头、USB4/5 东绕、 J23 桥），+3V3 / GND / +12V 平面网每脚一孔，0.125 网格 + PathFinder 开关（route_base、remote_route.ps1）；剩 37 个网待手工补 - 铺铜：4 层重写，入口链自南向北切段 + 断面校核（pour_base）； 已下发布线 / 缝合孔 / 铜面轮廓，填铜未成功（待查） - 工具：plot_base / plot_routes / shot_base，board_check 通孔两层都算 Co-Authored-By: Claude Opus 5 <[email protected]> Claude-Session: https://claude.ai/code/session_0168Bu6SEx3cXXCJLkdnE6zB
这个提交包含在：
zhou yang
+76
-37
@@ -1,37 +1,76 @@
|
||||
# -*- coding: utf-8 -*-
|
||||
u"""重载 EasyEDA 客户端页面（skill §9k/§9s）：关对话框 → 删铺铜边框 → 存盘 → reload → 等 windowId 变掉。"""
|
||||
import json, os, sys, time, urllib.request
|
||||
HERE = os.path.dirname(os.path.abspath(__file__)); sys.path.insert(0, HERE)
|
||||
from eda import run, port
|
||||
JS = u"""
|
||||
const sleep = ms => new Promise(r => setTimeout(r, ms));
|
||||
const nat = b => { const o={bubbles:true,cancelable:true,view:window,button:0};
|
||||
for (const t of ['pointerdown','mousedown','pointerup','mouseup','click'])
|
||||
b.dispatchEvent(new (t.startsWith('pointer')?PointerEvent:MouseEvent)(t,o)); };
|
||||
for (const b of document.querySelectorAll('button'))
|
||||
if ((b.innerText||'').trim()==='取消' && b.offsetParent!==null) { nat(b); await sleep(800); }
|
||||
await eda.dmt_EditorControl.openDocument('f126ffb29c92f9b2');
|
||||
await sleep(1200);
|
||||
let n = 0;
|
||||
for (const o of await eda.pcb_PrimitivePour.getAll()) { await eda.pcb_PrimitivePour.delete(o.primitiveId); n++; }
|
||||
await eda.pcb_Document.save();
|
||||
await sleep(1500);
|
||||
window.onbeforeunload = null;
|
||||
setTimeout(() => location.reload(true), 300);
|
||||
return {deletedPours: n};
|
||||
"""
|
||||
def wid():
|
||||
try:
|
||||
with urllib.request.urlopen('http://127.0.0.1:%d/health' % port(), timeout=3) as r:
|
||||
return json.loads(r.read()).get('activeWindowId')
|
||||
except Exception:
|
||||
return None
|
||||
w0 = wid()
|
||||
r = run(JS, timeout=60)
|
||||
print(u'重载前 windowId %s，删铺铜边框 %s' % (w0, (r.get('result') or {}).get('deletedPours')))
|
||||
for i in range(30):
|
||||
time.sleep(5)
|
||||
w = wid()
|
||||
if w and w != w0:
|
||||
print(u'已重载，新 windowId %s（%d s）' % (w, (i + 1) * 5)); time.sleep(10); sys.exit(0)
|
||||
sys.exit(u'!! 150 s 内 windowId 没变，重载没成功')
|
||||
# -*- coding: utf-8 -*-
|
||||
u"""重载 EasyEDA 客户端页面（skill §9k/§9s）：关对话框 → 删铺铜边框 → 存盘 → reload → 等 windowId 变掉。"""
|
||||
import json, os, sys, time, urllib.request
|
||||
HERE = os.path.dirname(os.path.abspath(__file__)); sys.path.insert(0, HERE)
|
||||
from eda import run, port
|
||||
JS = u"""
|
||||
const sleep = ms => new Promise(r => setTimeout(r, ms));
|
||||
const nat = b => { const o={bubbles:true,cancelable:true,view:window,button:0};
|
||||
for (const t of ['pointerdown','mousedown','pointerup','mouseup','click'])
|
||||
b.dispatchEvent(new (t.startsWith('pointer')?PointerEvent:MouseEvent)(t,o)); };
|
||||
for (const b of document.querySelectorAll('button'))
|
||||
if ((b.innerText||'').trim()==='取消' && b.offsetParent!==null) { nat(b); await sleep(800); }
|
||||
await eda.dmt_EditorControl.openDocument('942ed1560d81c1e7');
|
||||
await sleep(1200);
|
||||
let n = 0;
|
||||
for (const o of await eda.pcb_PrimitivePour.getAll()) { await eda.pcb_PrimitivePour.delete(o.primitiveId); n++; }
|
||||
await eda.pcb_Document.save();
|
||||
await sleep(1500);
|
||||
window.onbeforeunload = null;
|
||||
setTimeout(() => location.reload(true), 300);
|
||||
return {deletedPours: n};
|
||||
"""
|
||||
def wid():
|
||||
try:
|
||||
with urllib.request.urlopen('http://127.0.0.1:%d/health' % port(), timeout=3) as r:
|
||||
return json.loads(r.read()).get('activeWindowId')
|
||||
except Exception:
|
||||
return None
|
||||
w0 = wid()
|
||||
r = run(JS, timeout=60)
|
||||
print(u'重载前 windowId %s，删铺铜边框 %s' % (w0, (r.get('result') or {}).get('deletedPours')))
|
||||
COUNT_JS = u"""
|
||||
await eda.dmt_EditorControl.openDocument('942ed1560d81c1e7');
|
||||
await new Promise(r => setTimeout(r, 9000));
|
||||
let nc=0, nl=0, nv=0, npad=0;
|
||||
for (const c of await eda.pcb_PrimitiveComponent.getAll()) nc++;
|
||||
for (const l of await eda.pcb_PrimitiveLine.getAll()) nl++;
|
||||
for (const v of await eda.pcb_PrimitiveVia.getAll()) nv++;
|
||||
for (const p of await eda.pcb_PrimitivePad.getAll()) npad++;
|
||||
return {doc: (await eda.dmt_Pcb.getCurrentPcbInfo() || {}).name, nc, nl, nv, npad};
|
||||
"""
|
||||
|
||||
|
||||
def assert_alive():
|
||||
u"""⚠⚠ 重载之后**必须**先数一遍图元，确认桥接和文档真的接上了再往下走。
|
||||
|
||||
2026-09-07 就是漏了这一步把载板弄丢的：重载回来后铜层读回全 0
|
||||
（skill §9ae 那个陈旧上下文），而紧接着跑的 `pcb2_pour.py --push`
|
||||
又在那个状态下调了一次 `save()` —— 把“空”写回了文档，
|
||||
301 件的下板没事、223 件的载板只剩下丝印和板框，只能走工程历史恢复。
|
||||
|
||||
“重载成功”的判据不是 windowId 变了，是**图元数不为零**。
|
||||
不过关、绝不允许后面任何一步 save()。
|
||||
"""
|
||||
r = run(COUNT_JS, timeout=120)
|
||||
if not r.get('success'):
|
||||
sys.exit(u'!! 重载后数图元失败，**不要再跑任何会 save() 的脚本**: %s'
|
||||
% json.dumps(r, ensure_ascii=False)[:400])
|
||||
d = r['result']
|
||||
print(u'重载后回查：%s 元件 %s / 导线 %s / 过孔 %s / 焊盘 %s'
|
||||
% (d.get('doc'), d.get('nc'), d.get('nl'), d.get('nv'), d.get('npad')))
|
||||
if not d.get('nc') or not d.get('nl') or not d.get('npad'):
|
||||
sys.exit(u'!! 铜层读回 0 —— 桥接与文档失同步（skill §9ae）。\n'
|
||||
u' **立刻停手，不要 save()，不要跑 pcb2_pour.py** —— 那一步会把空写回去。\n'
|
||||
u' 先 API Gateway → 重新连接，不行就重启客户端，再跑一次本脚本确认数字回来了。')
|
||||
|
||||
|
||||
for i in range(30):
|
||||
time.sleep(5)
|
||||
w = wid()
|
||||
if w and w != w0:
|
||||
print(u'已重载，新 windowId %s（%d s）' % (w, (i + 1) * 5))
|
||||
time.sleep(10)
|
||||
assert_alive()
|
||||
sys.exit(0)
|
||||
sys.exit(u'!! 150 s 内 windowId 没变，重载没成功')
|
||||
|
||||
在新工单中引用
屏蔽一个用户