#!/bin/bash
# D16 南带补线上服务器（CLAUDE.md：布线运算只在 10.5.5.13 跑）。
#
#   bash .claude/r2/remote_d16.sh [NET=宽度 ...]
#
# 前提：本机已把板上快照写成 .claude/r2/_board_for_nets.json（旧入口的铜已删）。
# 结果拉回 .claude/r2/_d16_route.out.json / _d16_route.log，**不下发** —— 本机复核净距之后再下发。
set -euo pipefail
SERVER=${SERVER:-10.5.5.13}
INTERP=${INTERP:-/root/pypy/bin/pypy3}
SSH=/c/Windows/System32/OpenSSH/ssh.exe
SCP=/c/Windows/System32/OpenSSH/scp.exe
REPO=$(cd "$(dirname "$0")/../.." && pwd)
cd "$REPO"
[ -f .claude/r2/_board_for_nets.json ] || { echo '缺 _board_for_nets.json（先抓板）'; exit 1; }
TMP=${TMPDIR:-/tmp}
TGZ=$(mktemp -u "$TMP/d16-route-XXXXXX").tgz
tar --exclude='*.png' --exclude='*.bak' --exclude='__pycache__' --exclude='archive_*' \
    --exclude='_base_routes.r*' --exclude='_blade_routes.*' --exclude='_base_board_*' -czf "$TGZ" \
    .claude/r2 .claude/eda.py .claude/eda-parts.json .claude/pcb_pour.py
R=$("$SSH" "$SERVER" 'mktemp -d /tmp/dcdc-d16.XXXXXX' | tr -d '\r')
case "$R" in /tmp/dcdc-d16.*) ;; *) echo "远程目录不对: $R"; exit 1 ;; esac
cleanup() {
  rm -f "$TGZ"
  # ⚠ `[.]claude` 是故意的：直接写目录串的话 pkill 会先把执行这条命令的远程 shell 杀掉
  "$SSH" "$SERVER" "pkill -f '$R/[.]claude/r2/d16_route' ; rm -rf -- '$R'" || true
}
trap cleanup EXIT
"$SCP" -q "$(cygpath -w "$TGZ")" "$SERVER:$R/b.tgz"
"$SSH" "$SERVER" "tar -xzf $R/b.tgz -C $R"
# MODE=gnd：d16_gndfix.py（给指定 GND 焊盘各打一个孔），拉回 _d16_gndfix.out.json
if [ "${MODE:-route}" = gnd ]; then
  "$SSH" "$SERVER" "cd $R && DCDC_ROUTE_SERVER=1 $INTERP .claude/r2/d16_gndfix.py $* 2>&1" | tee .claude/r2/_d16_gndfix.log
  "$SCP" -q "$SERVER:$R/.claude/r2/_d16_gndfix.out.json" .claude/r2/_d16_gndfix.out.json
  echo "已拉回 .claude/r2/_d16_gndfix.out.json（未下发）"
  exit 0
fi
# MODE=rip：d16_rip.py（拆 U13 I²C 三线束，连同 CH224A 的 SDA/SCL 一起重布；只改数据不动板），拉回 _d16_rip.out.json
if [ "${MODE:-route}" = rip ]; then
  "$SSH" "$SERVER" "cd $R && DCDC_ROUTE_SERVER=1 $INTERP .claude/r2/d16_rip.py $* 2>&1" | tee .claude/r2/_d16_rip.log
  "$SCP" -q "$SERVER:$R/.claude/r2/_d16_rip.out.json" .claude/r2/_d16_rip.out.json
  echo "已拉回 .claude/r2/_d16_rip.out.json（未下发）"
  exit 0
fi
# MODE=tap：d16_tap.py（孤立小块接到本网已有铜上，大块不挑焊盘代表），拉回 _d16_tap.out.json
if [ "${MODE:-route}" = tap ]; then
  "$SSH" "$SERVER" "cd $R && DCDC_ROUTE_SERVER=1 $INTERP .claude/r2/d16_tap.py $* 2>&1" | tee .claude/r2/_d16_tap.log
  "$SCP" -q "$SERVER:$R/.claude/r2/_d16_tap.out.json" .claude/r2/_d16_tap.out.json
  echo "已拉回 .claude/r2/_d16_tap.out.json（未下发）"
  exit 0
fi
# MODE=nets：只补给定的网（route_nets.py：板上铜全当障碍，按连通块接起来），拉回 _route_nets.out.json
if [ "${MODE:-route}" = nets ]; then
  "$SSH" "$SERVER" "cd $R && DCDC_ROUTE_SERVER=1 $INTERP .claude/r2/route_nets.py $* 2>&1" | tee .claude/r2/_route_nets.log
  "$SCP" -q "$SERVER:$R/.claude/r2/_route_nets.out.json" .claude/r2/_route_nets.out.json
  echo "已拉回 .claude/r2/_route_nets.out.json（未下发）"
  exit 0
fi
# MODE=reach：不布线，跑 d16_reach.py（SDA6 / SCL6 在布线网格上的泛洪诊断），拉回 _d16_reach.out.json
if [ "${MODE:-route}" = reach ]; then
  "$SSH" "$SERVER" "cd $R && DCDC_ROUTE_SERVER=1 $INTERP .claude/r2/d16_reach.py $* 2>&1" | tee .claude/r2/_d16_reach.log
  "$SCP" -q "$SERVER:$R/.claude/r2/_d16_reach.out.json" .claude/r2/_d16_reach.out.json
  echo "已拉回 .claude/r2/_d16_reach.out.json"
  exit 0
fi
"$SSH" "$SERVER" "cd $R && DCDC_ROUTE_SERVER=1 /usr/bin/time -f 'REMOTE_TIME=%e sec RSS=%M KB' $INTERP .claude/r2/d16_route.py $* 2>&1" \
  | tee .claude/r2/_d16_route.log
"$SCP" -q "$SERVER:$R/.claude/r2/_d16_route.out.json" .claude/r2/_d16_route.out.json
echo "已拉回 .claude/r2/_d16_route.out.json（未下发）"