R2：底板 / 刀片布局布线脚本、快照、截图与规划文档更新（含外壳、打印件、布线归档）

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-04 19:24:45 +08:00
@@ -0,0 +1,123 @@
+# -*- coding: utf-8 -*-
+u"""给风扇那一窝重排后的 **GND 脚补过孔**（扎进 L2/L3 整层地）。
+
+    /c/Python314/python .claude/r2/fan_gnd_vias.py           # 只算 + 报告
+    /c/Python314/python .claude/r2/fan_gnd_vias.py --push    # 下发
+
+## 为什么要单独一个脚本
+
+`route_base.plane_vias()` 是**全板口径**（给所有 GND 贴片焊盘打孔），直接调会在整块板上
+重打一遍孔；而 `repair_base.py` 只补信号网、根本不做平面网扇出。
+于是 2026-09-12 重排之后实测：22 件里有 **9 只 GND 脚新位置底下没有孔**
+（原来的孔还留在旧脚位上，成了孤立的缝合孔）。这种漏法 DRC 不报、
+`board_check` 也只会说「GND 靠铜面成网」，要靠这一支单独查。
+
+落孔点：焊盘中心优先；中心放不下就在焊盘外圈按 0.25 网格找一个既不压异网铜、
+也不压别的孔的点，离本焊盘边不超过 `MAX_OUT`（太远就不是这只脚的回流孔了）。
+"""
+import io
+import json
+import math
+import os
+import sys
+
+sys.stdout.reconfigure(encoding='utf-8')
+HERE = os.path.dirname(os.path.abspath(__file__))
+sys.path.insert(0, os.path.dirname(HERE))
+sys.path.insert(0, HERE)
+import fp_edge                                                   # noqa: E402
+import place_base as PL                                          # noqa: E402
+
+MIL = fp_edge.MIL
+PCB = '7b9524b6aaf6f235'
+VIA_D, VIA_HOLE = 0.6, 0.3
+CLR = 0.20                       # 孔到异网铜
+DRILL = 0.25                     # 钻孔到钻孔
+MAX_OUT = 1.2                    # 落孔点离焊盘边最远多少
+STEP = 0.125
+
+
+def seg_d(px, py, ax, ay, bx, by):
+    dx, dy = bx - ax, by - ay
+    L2 = dx * dx + dy * dy
+    t = 0.0 if L2 < 1e-12 else max(0.0, min(1.0, ((px - ax) * dx + (py - ay) * dy) / L2))
+    return math.hypot(px - (ax + t * dx), py - (ay + t * dy))
+
+
+def main():
+    cu = json.load(io.open(os.path.join(HERE, '_base_fan_input.json'), encoding='utf-8'))
+    pads = json.load(io.open(os.path.join(HERE, '_base_pads.json'), encoding='utf-8'))
+    segs = cu['segs']
+    vias = [(v[0], v[1], v[2]) for v in cu['vias']]
+    gnd = [p for p in pads if p[0] in PL.FAN_REFS and p[7] == 'GND']
+    print(u'这一窝的 GND 脚：%d 只' % len(gnd))
+
+    def free(vx, vy, net='GND'):
+        for s in segs:
+            if s[6] == net:
+                continue
+            if seg_d(vx, vy, s[1], s[2], s[3], s[4]) < VIA_D / 2 + s[5] / 2 + CLR:
+                return False
+        for p in pads:
+            if p[7] == net or p[6] == 12:
+                continue
+            dx = abs(vx - p[2]) - p[4] / 2 - VIA_D / 2
+            dy = abs(vy - p[3]) - p[5] / 2 - VIA_D / 2
+            d = math.hypot(max(dx, 0), max(dy, 0)) if (dx > 0 and dy > 0) else max(dx, dy)
+            if d < CLR:
+                return False
+        for v in vias:
+            if math.hypot(vx - v[0], vy - v[1]) < VIA_HOLE + DRILL:
+                return False
+        return True
+
+    made, miss = [], []
+    for p in gnd:
+        px, py, w, h = p[2], p[3], p[4], p[5]
+        if any(math.hypot(px - v[0], py - v[1]) < max(w, h) / 2 + 0.3 for v in vias if v[2] == 'GND'):
+            continue                                     # 脚上已经有孔
+        cand = [(0.0, px, py)]
+        k = 1
+        while k * STEP <= MAX_OUT + max(w, h) / 2:
+            r = k * STEP
+            for ang in range(0, 360, 15):
+                vx = round(px + r * math.cos(math.radians(ang)), 4)
+                vy = round(py + r * math.sin(math.radians(ang)), 4)
+                dx, dy = abs(vx - px) - w / 2, abs(vy - py) - h / 2
+                out = math.hypot(max(dx, 0), max(dy, 0))
+                if out <= MAX_OUT:
+                    cand.append((r, vx, vy))
+            k += 1
+        got = None
+        for _r, vx, vy in cand:
+            if free(vx, vy):
+                got = (vx, vy)
+                break
+        if got:
+            made.append([got[0], got[1], 'GND'])
+            vias.append((got[0], got[1], 'GND'))
+            print(u'   %s.%s (%.2f,%.2f) → 孔 (%.2f,%.2f)' % (p[0], p[1], px, py, got[0], got[1]))
+        else:
+            miss.append(u'%s.%s (%.2f,%.2f)' % (p[0], p[1], px, py))
+    print(u'\n要补 %d 个孔；找不到落点 %d 只' % (len(made), len(miss)))
+    for t in miss:
+        print(u'   ⛔ ' + t)
+    if not made or '--push' not in sys.argv:
+        return
+    from eda import run
+    r = run("""
+await eda.dmt_EditorControl.openDocument('%s');
+await new Promise(r=>setTimeout(r,2500));
+const V = %s, MIL = %s;
+let n = 0;
+for (const [x, y, net] of V) {
+  try { await eda.pcb_PrimitiveVia.create(net, x*MIL, y*MIL, %s*MIL, %s*MIL); n++; } catch (e) {}
+}
+await eda.pcb_Document.save();
+return {made: n, now: (await eda.pcb_PrimitiveVia.getAll()||[]).length};
+""" % (PCB, json.dumps(made), MIL, VIA_HOLE, VIA_D), timeout=600)
+    print(json.dumps(r.get('result'), ensure_ascii=False))
+
+
+if __name__ == '__main__':
+    main()