固件 A16:风扇闭环接进任务体 + NTC / TACH 真实采样(已上板)

- ntc.{h,c}(宿主机可测):分压端 mV → Ω → NCP18XH103F03RB 的 R-T 表插值;
  开路 / 短路 / 表外一律「读不到」(t_thermal 因此满速)
- thermal_esp.{h,c}(仅 IDF):ADC1 oneshot + 曲线校准读两路 NTC;两个 PCNT 单元数 TACH 边沿
- app_main:task_thermal 任务体、t_thermal_init 放在上电恢复之前、status 带热管理快照
- test_ntc.c 4 例;全工程 429 例全绿;版本 0.1.0-a16
- 板 B:两路 NTC 38.2 / 34.0 °C;风扇两路 rpm 0 报停转(拉满电流不涨,疑未插风扇,待确认)

Co-Authored-By: Claude Opus 5.5 <[email protected]>
这个提交包含在:
zhou yang
2026-09-27 13:31:32 +08:00
共同撰写人 Claude Opus 5.5
父节点 c85eec53e6
当前提交 c37c08aa43
共修改 12 个文件,包含 450 行新增和 47 行删除
+5 -2
查看文件
@@ -1,5 +1,5 @@
# ESP-IDF 侧的 main 组件。
# app_main.c / ulink_esp.c / mlink_esp.c 是 ESP 专用;其余 .c 必须同时在宿主机上编得过
# app_main.c / ulink_esp.c / mlink_esp.c / thermal_esp.c 是 ESP 专用;其余 .c 必须同时在宿主机上编得过
# (新增文件时两处都要加:这里 + host/CMakeLists.txt 的 PHONERAIL_CORE_SRCS)。
idf_component_register(
SRCS "app_main.c"
@@ -25,7 +25,10 @@ idf_component_register(
"netcfg.c"
"mlink.c"
"bringup.c"
"ntc.c"
"thermal_esp.c"
INCLUDE_DIRS "."
EMBED_TXTFILES "certs/evse_ca.pem"
REQUIRES phonerail_hal drv esp_driver_usb_serial_jtag
esp_wifi esp_netif esp_event esp_timer nvs_flash mqtt)
esp_wifi esp_netif esp_event esp_timer nvs_flash mqtt
esp_adc esp_driver_pcnt)