kicad：EasyEDA→KiCad 工程（Board1/Board2）、库、脚本与评审文档（IC 引脚、风扇、热、EDL 供电、布局规则）

Co-Authored-By: Claude Opus 5.5 <[email protected]>

kicad/scripts/apply_sanyo_fan.py

@@ -0,0 +1,90 @@
+"""Apply the catalog-backed FAN-R2 part selection to the existing R1 schematic."""
+import json
+from pathlib import Path
+import shutil
+
+from schematic_maintenance import ROOT, parse, children, child, properties
+from revise_four_wire_fans import prop, quote, uid
+
+
+def main():
+    selection = json.loads((ROOT/'fan-selection.json').read_text(encoding='utf-8'))
+    path = ROOT/'PhoneRail-Board1/P6-FAN-EDL.kicad_sch'
+    source = path.read_text(encoding='utf-8')
+    if 'SANYO FAN SELECTION R2' in source:
+        print('FAN-R2 already applied; skipped')
+        return
+    assert 'FOUR-WIRE FAN PROTOTYPE R1' in source
+    root = parse(source)
+    edits = []
+    for symbol in children(root, 'symbol'):
+        p = properties(symbol)
+        ref = p['Reference'][2]
+        values = {}
+        if ref in {'J26', 'J27'}:
+            values = {'Value': '1725672', 'MPN': '1725672', 'Manufacturer': 'Phoenix Contact',
+                      'LCSC': 'C3816889', 'Footprint': selection['connector']['footprint'],
+                      'Datasheet': 'https://item.szlcsc.com/datasheet/1725672/4384563.html',
+                      'Fan_MPN': selection['mpn'], 'Fan_LCSC': selection['lcsc'],
+                      'Fan_Device_UUID': selection['easyeda_device_uuid'],
+                      'Fan_Datasheet': selection['datasheet_url'],
+                      'Harness': '1 Black GND; 2 Red +12V_SW; 3 Yellow TACH; 4 Brown PWM',
+                      'Description': 'Four-way screw terminal for off-board SANYO fan; fan is in fan-assembly-bom.csv'}
+        if ref in {'R745', 'R749'}:
+            values = {'Value': '15k', 'MPN': '0402WGF1502TCE', 'LCSC': 'C25756'}
+            # C25756 cross-checked through the live catalog on 2026-09-07.
+        x, y = map(float, child(symbol, 'at')[1:3])
+        extra = []
+        for key, value in values.items():
+            if key in p:
+                node = p[key]
+                raw = source[node.start:node.end]
+                old = quote(node[2])
+                prefix = '(property '+quote(key)+' '
+                assert raw.startswith(prefix+old)
+                edits.append((node.start, node.end, prefix+quote(value)+raw[len(prefix+old):]))
+            else:
+                extra.append(prop(key, value, x, y, True))
+        if extra:
+            edits.append((symbol.end-1, symbol.end-1, '\n'.join(extra)))
+        if ref in {'C738', 'D2'}:
+            for key, dy in [('Reference', -2.54), ('Value', 0)]:
+                node = child(p[key], 'at')
+                edits.append((node.start, node.end, f'(at {x+22.86:g} {y+dy:g} 270)'))
+    replacements = {
+        'FOUR-WIRE FAN PROTOTYPE R1': 'SANYO FAN SELECTION R2 / 2x 9G0612P4S001 / C2920592',
+        '2x NF-A6x25 PWM / J26 intake / J27 exhaust. Vendor limits and prototype tests OPEN.':
+            'J26 intake / J27 exhaust. 12V, 60x60x25mm, 25kHz PWM. Startup/thermal verification OPEN.',
+        'Keyed PC fan header: 1 GND / 2 +12V / 3 TACH / 4 PWM.':
+            'Screw terminals: 1 BLACK GND / 2 RED +12V / 3 YELLOW TACH / 4 BROWN PWM.',
+        'Confirm header drawing, key orientation and cable fit before layout.':
+            'Bare AWG26 leads, 300-350mm. No PC-fan plug. 0% PWM still runs at about 3300RPM.',
+        '25kHz target; invert MCU duty: D_gpio = 1 - D_fan. Confirm vendor limits.':
+            '25kHz nominal; invert MCU duty: D_gpio = 1 - D_fan. Family PWM limits: see FAN_CIRCUIT.md.',
+        'RAW high: Vgate ~ Vfan/3. RAW low: Vgate ~ Vtach_low/2.':
+            'R745/R749 = 15k: Vgate high ~ Vfan/3.5; low <=0.24V nominal for RAW <=0.6V.',
+    }
+    for note in children(root, 'text'):
+        if note[1] in replacements:
+            raw = source[note.start:note.end]
+            edits.append((note.start, note.end, raw.replace(quote(note[1]), quote(replacements[note[1]]), 1)))
+    rev = child(child(root, 'title_block'), 'rev')
+    edits.append((rev.start, rev.end, '(rev "FAN-R2")'))
+    for start, end, value in sorted(edits, reverse=True):
+        source = source[:start]+value+source[end:]
+    source = source.replace('FanHeader', 'FanTerminal')
+    parse(source)
+    backup = ROOT/'out/before-sanyo-selection'
+    backup.mkdir(exist_ok=False)
+    shutil.copy2(path, backup/path.name)
+    path.write_text(source, encoding='utf-8', newline='\n')
+    lib = ROOT/'lib/PhoneRail-Fan.kicad_sym'
+    lib.write_text(lib.read_text(encoding='utf-8').replace('FanHeader', 'FanTerminal'), encoding='utf-8', newline='\n')
+    name = selection['connector']['footprint'].split(':')[1]
+    fp = Path('D:/KiCad/share/kicad/footprints/TerminalBlock_Phoenix.pretty')/(name+'.kicad_mod')
+    shutil.copy2(fp, ROOT/'lib/PhoneRail-Fan.pretty'/fp.name)
+    print('Applied SANYO fan metadata, Phoenix terminals and 15k TACH gate resistors')
+
+
+if __name__ == '__main__':
+    main()